Search
C.E. Smith
C. E. Smith Company, Inc. manufactures and sells replacement parts for small to mid-size boat trailers including trailer fenders, boat guides, galvanized bracketry, tire carriers, replacement wheel bearings, rubber rollers, roller shafts, u-bolts and other requirements for boat trailers. Shop the full inventory of C.E. Smith products on SiraWeb.com. With reliable service, no hassle returns and fast shipping you can shop with confidence.
10" Panel Bracket - Galvanized
One Piece Keel Roller Brackets. Heavy duty one piece brackets which mount to cross member to hold roller. For use with 5/8" shaft with 17/32" x 5" slot for adjustment. 11 ga. steel. Galvanized finish. Roller: 10". Slot center: 8
$22.95
$20.14
10" Swivel Bolster Bracket
Swivel Bolster Bracket Assemblies. Bunk mount holes 2-1/2" on center. Width: 2-1/2". Assembled length: 11". 2 slots. Slot length: 3-3/4" each. CTN:36
$24.99
$16.79
10" V-Keel Roller Bracket Assembly
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with black rubber roller for easy installation. Roller: 10" keel. Shaft: 5/8". Mounting center: 8". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$66.95
$57.99
12" Panel Bracket - Galvanized
One Piece Keel Roller Brackets. Heavy duty one piece brackets which mount to cross member to hold roller. For use with 5/8" shaft with 17/32" x 5" slot for adjustment. 11 ga. steel. Galvanized finish. Roller: 12". Slot center: 10
$23.95
$21.02
12" Roller Bracket W/Tpr Roller
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with thermal plastic rubber roller. Roller: 12" keel. Shaft: 5/8". Mounting center: 10". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$85.95
$74.49
12" Swivel Bolster Bracket
Swivel Bolster Bracket Assemblies. Bunk mount holes 2-1/2" on center. Width: 2-1/2". Assembled length: 13". 2 slots. Slot length: 4-3/4" each. CTN:36
$17.95
$15.75
12" V-Keel Roller Bracket Assembly
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with black rubber roller for easy installation. Roller: 12" keel. Shaft: 5/8". Mounting center: 10". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$77.95
$67.49
16 Gauge Steel Fender 12
Round contour galvanized steel fender Fits 12" wheel size 7" W x 23-1/2" L x 6-1/2" rise Heavy duty 16 ga stamped steel Rolled edges Can be drilled for many applications Galvanized Paintable Mounting brackets NOT included Sold each Available in 8" (FND08), 12" (FND12), 13" (FND13), 14" (FND14)
$23.95
$21.99
16 Gauge Steel Fender 13
Round contour galvanized steel fender Fits 13" wheel size 8" W x 27-1/2" L x 11" rise Heavy duty 16 ga stamped steel Rolled edges Can be drilled for many applications Galvanized Paintable Mounting brackets NOT included Sold each Available in 8" (FND08), 12" (FND12), 13" (FND13), 14" (FND14)
$32.95
$29.99
16 Gauge Steel Fender 14" - 15
Round contour galvanized steel fender. Fits 14-15" wheel size 9" W x 31-1/2" L x 13" rise Heavy duty 16 ga stamped steel Rolled edges Can be drilled for many applications Galvanized Paintable Mounting brackets NOT included Sold each Available in 8" (FND08), 12" (FND12), 13" (FND13), 14" (FND14)
$41.95
$37.99
16 Gauge Steel Fender 8
Round contour galvanized steel fender Fits 8" wheel size 7" W x 20" L x 6" rise Heavy duty 16 ga stamped steel Rolled edges Can be drilled for many applications Galvanized Paintable Mounting brackets NOT included Sold each Available in 8" (FND08), 12" (FND12), 13" (FND13), 14" (FND14)
$22.95
$20.99
4 Bolt Trailer Hub Kit for 1" Spindle, 1250 lbs Capacity, CE Smith 13100
Shipshape Trailer Parts provides these convenient hub replacement kits for many trailer applications. Painted cast iron studded hub for 1" spindle. Bolt pattern: 4 x 4". Flange Outside Diameter: 5-9/16". Rated 1250 lbs. Hub Inside Diameter: 1.98". Maximum recommended wheel size: 12". Sold each: Includes hub, bearings, seals, dust cap, grease and lug nuts
$64.99
$51.99
4 Bolt Trailer Hub Kit for 1-1/16" Spindle, 1350 lbs Capacity, CE Smith 13109
Shipshape Trailer Parts provides these convenient hub replacement kits for many trailer applications. Painted cast iron studded hub for 1-1/16" spindle. Bolt pattern: 4 x 4". Flange Outside Diameter: 5-9/16". Rated 1350 lbs. Hub Inside Diameter: 1.98". Maximum recommended wheel size: 12". Sold each: -Includes hub, bearings, seals, dust cap, grease and lug nuts
$64.99
$57.49
4" Spool Roller Bracket Assembly
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with black rubber roller for easy installation. Roller: 4" spool. Shaft: 5/8". Mounting center: 2". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$34.95
$30.49
5 Bolt Trailer Hub Kit for 1" Spindle, 1250 lbs Capacity, CE Smith 13210
Shipshape Trailer Parts provides these convenient hub replacement kits for many trailer applications. Painted cast iron studded hub for 1" spindle. Bolt pattern: 5 x 4-1/2". Flange Outside Diameter: 5-9/16". Rated 1250 lbs. Hub Inside Diameter: 1.98". Maximum recommended wheel size: 12". Sold each: -Includes hub, bearings, seals, dust cap, grease and lug nuts
$65.99
$59.49
5 Bolt Trailer Hub Kit, Galvanized, 1" Spindle, 1250 lbs, CE Smith 13215
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 2.5K axles with BT8 spindles. Inner bearing and race, outer bearing and race, grease seal, cap, lug nuts, and cotter pin included. For 8" to 12" wheels. Includes galvanized hub fully assembled with pre-greased bearings, dust cap, cotter pin and lug nuts.
From $51.99
5" Panel Bracket - Galvanized
One Piece Keel Roller Brackets. Heavy duty one piece brackets which mount to cross member to hold roller. For use with 5/8" shaft with 17/32" x 5" slot for adjustment. 11 ga. steel. Galvanized finish. Roller: 5". Slot center: 3
$26.99
$17.86
5" V-Keel Roller Bracket Assembly
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with black rubber roller for easy installation. Roller: 5" keel. Shaft: 5/8". Mounting center: 3". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$39.95
$34.49
8" Panel Bracket - Galvanized
One Piece Keel Roller Brackets. Heavy duty one piece brackets which mount to cross member to hold roller. For use with 5/8" shaft with 17/32" x 5" slot for adjustment. 11 ga. steel. Galvanized finish. Roller: 8". Slot center: 6
$20.95
$18.39
8" Roller Bracket W/Tpr Roller
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with thermal plastic rubber roller. Roller: 8" keel. Shaft: 5/8". Mounting center: 6". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$71.95
$62.49
8" Swivel Bolster Bracket
Swivel Bolster Bracket Assemblies. Bunk mount holes 2-1/2" on center. Width: 2-1/2". Assembled length: 9". 2 slots. Slot length: 2-3/4" each. CTN: 48
$20.49
$13.64
8" V-Keel Roller Bracket Assembly
Our roller bracket assemblies for boat trailers are strong hot-dipped galvanized brackets with shock-absorbing rollers for proper keel support. Pre-assembled with black rubber roller for easy installation. Roller: 8" keel. Shaft: 5/8". Mounting center: 6". 5" adjustment slot. Attach with 1/2" or 7/16" bolts
$57.95
$49.99
Angle "l" Bracket - Galvanized
ANGLE 'L' BRACKETS. Use as top mounted roller bracket or as tie down. Heavy 7 ga hot-dipped galvanized steel. Holds 1/2" roller shaft. 2" x 2-1/2". Sold in pairs. Display packaged
$101.49
$67.49
Axle Tie Plate Flat Galvanized for 1/2" U-Bolt, CE Smith 20023GA
Flat trailer axle tie plate, galvanized 1/4" steel. 4" length, 3.81" width, hole centers 2.63" and 2.38", accepts 1/2" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$5.99
$4.99
Axle Tie Plate Flat Galvanized for 1/2" U-Bolt, CE Smith 20044GA
Flat trailer axle tie plate, galvanized 1/4" steel. 5" length, 3.75" width, hole centers 2.75 " and 2.38", accepts 1/2" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$5.99
$4.99
Axle Tie Plate Flat Galvanized for 3/8" U-Bolt, CE Smith 20015G
Flat trailer axle tie plate, galvanized 1/4" steel. 3.5" length, 3.5" width, hole centers 2.25", accepts 3/8" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$4.99
$3.99
Axle Tie Plate Flat Galvanized for 3/8" U-Bolt, CE Smith 20022G
Flat trailer axle tie plate, galvanized 1/4" steel. 3.5" length, 3" width, hole centers 2.35 " and 2", accepts 3/8" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$3.99
$2.99
Axle Tie Plate Flat Galvanized, Three Hole, CE Smith 20024G
3 hole Axle Tie Plate. Flat, Galvanized, 1/4 inch steel. Length: 5.0". Hole centers: 3.56". Width: 1.50". Punched hole diameter: .55 inch
$2.99
$1.99
Axle Tie Plate Formed Galvanized for 1/2" U-Bolt, CE Smith 20001G
Formed trailer axle tie plate, galvanized 1/4" steel. 5.83" length, 3.75" width, hole centers 2.94" and 2.31", accepts 1/2" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$8.99
$5.99
Axle Tie Plate Formed Galvanized for 1/2" U-Bolt, CE Smith 20003G
Formed trailer axle tie plate, galvanized 1/4" steel. 5.83" length, 3.75" width, hole centers 3.62" and 2.26", accepts 1/2" U-bolt. Used together with U-Bolts and nuts to connect the leaf springs to the trailer axle.
$8.99
$4.99
Min:
$0.00
Max:
$213.00
$0
$213
Payment options
