Trailer Parts

With one installation of Ride-On, lead weights become a thing of the past; while Ride-On TPS works in conjunction with traditional lead weights, you won't need them anymore Specially formulated to hydrodynamically balance high speed tires and dampen road noise and vibrations that cause a rough ride Continually adjusts and literally rebalances your tires as your ride for the legal life of the tires If your tire is punctured the tire literally fixes itself as the centrifugal force of the rotating tire and internal air pressure force Ride-On TPS into the hole, sealing it virtually instantly Since it helps eliminate porosity leaks that cause tires to deflate over time, your tires stay properly inflated, last longer, and your bike handles better and gets more miles per gallon Eliminates 85-95% of flats in tubeless tires from objects up to 1/4" (1/8" for tube tires) that penetrate the contact patch of the tire Important Notice: After installing Ride-On TPS Motorcycle Formula sealant into your tires, you may notice a slight vibration until the sealant has warmed up and distributed evenly in your tires. This process usually takes 2 to 5 miles. Please DO NOT attempt to rebalance your tires after the installation of this product. Ride-On TPS is a balancing compound and will act as a balancer and will result in erroneous readings from a dynamic spin balancer that does not compensate for tire deflection, weight of the bike, brakes or other suspension components. Ride-On TPS is TPMS friendly, however, it is not recommended for use in 2009, 2010 and 2012 Honda Gold Wings as their TPMS Sensors are not hermetically sealed. (Also note, that though Ride-On TPS eEliminates 85-95% of flats in tubeless tires from objects up to 1/4" (1/8" for tube tires) that penetrate the contact patch of the tire; objects that puncture tires often tear tubes and thus Ride-On's efficiency in the tube tires is reduced to 55-65%. If the puncturing object remains in the tire, it is vital to remove it as soon as possible to prevent further injury to the tire or tube.)

Black RubberEnd Caps for Bow, Spool, Keel and Side Guide Rollers. Length: 1-1/4". Diameter: 3". Shaft size: 1/2

Black RubberEnd Caps for Bow, Spool, Keel and Side Guide Rollers Length: 1-3/4" Diameter: 2-1/2" Shaft size: 1/2

Black RubberEnd Caps for Bow, Spool, Keel and Side Guide Rollers. Length: 1-1/4". Diameter: 3-1/2". Shaft size: 5/8

Black Rubber End Caps for Bow, Spool, Keel and Side Guide Rollers for Boat Trailers. Length: 1-3/4". Diameter: 2-1/2". Shaft size: 5/8

Roller Guide-on Makes boat loading easier Galvanized posts are pre assembled with 9" roller and end caps Can be mounted on top of frame for extra height Height is 21" with adjustments out to 13" from the frame on each side Fits frames up to 3"W x 4-1/4"H Post: 1-1/2" sq. 16 ga Angle: 90° Sold per pair in display box

Rope ring 1/4" diameter steel ring Steel ring and formed steel clamp 800 lb. working load limit 2,400 lb. ultimate breaking strength Do not use for lifting Sold each

Surface mounted rope ring with bolt on bracket Includes bolt on bracket with forged rope ring 3/8" diameter steel ring Zinc plated 2,000 lb. working load limit 6,000 lb. ultimate breaking strength Do not use for lifting Sold each

Light duty surface mount rope ring Welded D-ring with 14 gauge steel clip 1/4" diameter D-ring 1/4" mounting holes Stainless steel 400 lb. working load limit 1,200 lb. ultimate breaking strength Do not use for lifting Sold each

Surface mounted rope ring Steel pan with 1/4" diameter steel ring 500 lb. working load limit 1,500 lb. ultimate breaking strength Do not use for lifting Sold each

Surface mounted rope ring with plastic pan 1/4" diameter steel ring Zinc plated 1,000 lb. working load limit 3,000 lb. ultimate breaking strength Do not use for lifting Sold each

Heavy duty recessed rotating rope ring Fabricated recessed ring rotates 360 degrees Designed to bolt to floor or weld to steel cross members 2,000 lb. working load limit 6,000 lb. ultimate breaking strength Do not use for lifting Sold each