36" 185 lbs. Gas Prop Suspa C16-22632 C1622632

These lift supports come with 13mm steel end fittings.

The end fittings take a 13mm ball stud and require 13mm retainer clips to keep the lift support securely connected to the ball stud.

Suspa Replacement Gas Springs or sometimes called struts, gas props or lift supports. This Prop is mostly used for truck cap tonneau covers/lids but also used on Snowmobile Trailers, Cargo Trailers, Motor Homes, Boats and can be used on many other products as well.

This is for (1) of genuine Suspa gas prop and fits many truck caps. Measurements are from center of hole to center of hole. For detailed measuring tips read our blog on measuring gas props. Please make sure you measure and check part numbers before you order. If you have a different brand of prop and can't cross reference, please contact us for assistance.

Installation Hints:

• Please make sure you measure and check part numbers before you order.
• If you have a different brand of prop and can't cross reference, please contact us for assistance.
• All measurements are from Center of Ball Socket to Center of Ball Sockets. For detailed measuring tips read our blog on measuring gas props.
• Most props are designed to be installed barrel side up and shaft side down. We recommend they are installed the same way as they were before you removed them.
• Most gas springs include plastic ball socket, steel, eyelet or clevis style end fittings which are used to secure it into place. All steel end fittings require retainer clips, sold separately.